JOEO - Professional Climate Chamber Manufacturers

Random vibration shaker table application

Random vibration shaker table can be applied to the following tests of products: A) Environmental adaptability test: Used to verify whether the product can work normally under external environmental conditions. Considering the safety factors of the product, the environmental adaptability test is similar to the vibration functional test(vibration shaker table) of the product. Both use the maximum environmental

Exploring the World of Battery High Frequency Vibration Shaker Brands

In the field of battery testing, high-frequency vibration testing machine is a vital equipment. They are designed to simulate various vibration conditions that batteries may encounter in actual use environments to ensure battery performance and stability. The Role of Battery High Frequency Vibration Shaker The high-frequency vibration testing machine simulates various vibration environments that batteries may e

Application of walk in environmental tester for cast iron

Introduction to walking environmental tester A walking environmental tester is a device that simulates various environmental conditions and is used to test the performance of materials and products in specific environments. This device can simulate environmental conditions such as temperature, humidity, salt spray, and ultraviolet radiation. Characteristics of cast iron Cast iron is an iron-based alloy conta

Salt Spray Corrosion Testing For Aero-Engine Metal Materials

Due to the high temperature, high humidity and high salt Marine environment, the corrosion problem of sea-based aircraft engine is particularly prominent. Although some Salt spray corrosion testing have been carried out for engine materials in the early stage, the test duration is mostly 96h recommended by GJB 150.11A-2009 "Salt spray Test Method for Military Equipment Environmental Test Method". With the

Application Of High Altitude Chamber In Aerospace

What's the use of an altitude chamber? Testing components for the aviation market requires a altitude simulation chamber. They are used to reproduce the operating conditions of components or products operating at high altitudes (i.e. environments where atmospheric pressure levels decrease over time). As the altitude increases, the pressure decreases: As the altitude increases, both the height of the air column

General Motors GM4298P Salt Spray Test

General Motors GM4298P Salt Spray Test GENERAL MOTORS ENGINEERING STANDARDS & Materials and Processes-Procedures JOEO Factory are professional support for this standard of corrosion test machine, our SSTC-Series are special design for this testing. Details of GM4298 ,Please reference with below : 1 SCOPE. This standard covers the requirements necessary to attain the conditions found in a neutral salt

ASTM D1654 Standard Test Method for Evaluation of Painted or Coated Specimens

What is ASTM D1654 standard? Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments1 8. Procedure A—Evaluation of Rust Creepage for Scribed Specimens 8.1 Rinse each specimen after completion of the exposure period, using a gentle stream of water at a temperature up to 45C (110°F). Remove coating along scribe with one of the following methods such

ASTM B368 Salt Spray (CASS Test) /Fog Testing

ASTM B368 Salt Spray (CASS Test) /Fog Testing ASTM B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) Scope: This test method prescribes the conditions required in copper-accelerated acetic acid-salt spray (CASS) testing for specification purposes. The standard does not specify the type of test specimen or exposure periods to be used for a specific product, nor

ASTM B117 Salt Spray Test

ASTM B117 Salt fog and Salt Spray Test What is the purpose of ASTM B117 Salt Spray test? The purpose of the ASTM B117 Salt Spray test is to provide a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating, substrate, or part itself. JOEO factory professional produce multiple chambers available to run parts and panels of many sizes for the ASTM B1

Halt Hass Chamber For PCB Accelerated Aging Test

PCB are an integral part of a wide variety of electrical and electronic devices and are the backbone of the device's functionality. PCBS play such an important role that thorough testing and inspection at every stage of the manufacturing process, including design, circuitry, functionality, etc., is essential. Therefore, HALT&HASS method is very popular in the electronic and electrical industry, high acceler

All Articles

Random vibration shaker table application

Exploring the World of Battery High Frequency Vibration Shaker Brands

Application of walk in environmental tester for cast iron

Salt Spray Corrosion Testing For Aero-Engine Metal Materials

Application Of High Altitude Chamber In Aerospace

General Motors GM4298P Salt Spray Test

ASTM D1654 Standard Test Method for Evaluation of Painted or Coated Specimens

ASTM B368 Salt Spray (CASS Test) /Fog Testing

ASTM B117 Salt Spray Test

Halt Hass Chamber For PCB Accelerated Aging Test

Quick Inquiry