Vibration Testing standards

JISD 1601 Automotive Parts Test Method--Electromagnetic Shaker For Vibration Test

Auto parts need to go through a series of environmental reliability tests such as temperature, humidity, salt spray corrosion, shock, vibration, etc. Among many tests, vibration test is the most difficult, JIS D 1601 standard aims to provide a common test method and standard for the automotive industry to evaluate the vibration environment faced by parts in actual use. The standard covers various types of vibration t

What Is ISTA 3A Vibration Testing

What is ISTA 3A Vibration Testing ISTA 3 Series tests are advanced tests and are designed to：Challenge the capability of the package and product to withstand transport hazards, but Utilize general simulation of actual transport hazards, andDo not necessarily comply with carrier packaging regulations. Test Procedure 3A is a general simulation test for individual packaged-products shipped through a parcel delivery

RTCA DO-160 Vibration Testing For Aircraft Airborne Equipment

What is DO-160 Vibration testing? Maintained and published by the Aeronautical Radio Technical Commissioner, or RTCA, and adopted by the US Federal Aviation Administration and the European Aviation Safety Agency since its first publication in 1975, DO-160 defines a set of minimum standard environmental test conditions (categories) and applicable test procedures for airborne equipment. The purpose of these tests is t

EN 61373 Vibration Test / IEC 61373 Vibration Test Of Railway Vehicles

EN 61373 Vibration test method specifies the requirements for test items for equipment used in railway rolling stock which, due to the nature of the railway operating environment, are subsequently subjected to vibration and shock. To ensure that the quality of the device is acceptable, it must withstand tests of reasonable duration, simulating the conditions of use throughout its expected life. Simulated long life t

UN 38.3 Vbration Testing For Lithium Battery

With the rapid development of modern science and technology, lithium batteries, as an efficient, portable and rechargeable energy storage solution, have been widely used in electronic products, electric vehicles and renewable energy. However, because lithium batteries have a certain risk of fire and explosion, ensuring the safety of lithium batteries has become a crucial task.Nearly all lithium batteries are required

MIL-STD-810 Method 519 Machine Guns Shaker Testing

MIL-STD-810 method 519 is suitable for applications where materials are required to demonstrate sufficient resistance to a "shooting plan" environment without unacceptable degradation of their structural integrity and functional performance Cunfirs chaale tante arn narformad ta neida n daaraa af annfidanan that matarial aan ntrunturallar and Ginatianallswithstand the relatively infrequent, short duration t

MIL-STD-167 Vibration Test Systems For Shipboard Equipment

MIL-STD-167 vibration test systems for shipboard equipment standard specifies procedures and requirements for environmental and internal excitation vibration tests for naval shipboard equipment installed on ships with conventional axial propulsion. Suitable for shipboard equipment subject to mechanical vibration from the environment and internal excitation caused by unbalanced rotating components of naval shipboard e

SAE-J2380 Vibration Shaker System Test Standards

SAE J2380 provides a test procedure for characterizing the effects of long-term, road-induced vibration and shock on the performance and service life of electric vehicle batteries. The purpose of this process is to verify the vibrational durability of the battery. Scanning sine wave vibration or random vibration is commonly used for this test of performance The performance of the program requires a one - to three

ASTM D999 Standard Test Method For Vibration Testing

Vibration tests for ASTM D999 containers can be used to assess the performance of containers with internal packaging and closure means, including their strength and protection of their contents when subjected to vibrations such as those experienced during transport. These procedures are applicable to testing any form, material, type, internal packaging design, closure, and container of any size and weight. They are n

NASA-STD-7002B Aerospace Shaker Vibration Test

Nasa-std-7002b is part of the NASA standard that provides a standard set of flight hardware test requirements, The standard applies to all payload hardware that NASA develops internally or under contract to launch on a single-use or reusable launch vehicle, including free vehicles and additional payloads. NASA-STD-7002B types of vibration testing Mechanical test Vibration test Thermal test EMI/EMC testing Fu

Vibration Testing

Quick Inquiry