All Products

JOEO THC-Series Climate test chambers are commonly used in electronic appliances, military, plastics, hardware, chemical, textile and other industries. Specific test products such as electronic parts, automotive parts, notebooks, batteries, packaging, cosmetics, circuit boards, temperature, moisture meters, etc.
Available for Climatic Test Chambers testing include a wide range of temperature ramp rates, humidity levels, and many standard and optional features, including temperature cycling, steady-state testing, and rapid rate of change. Other options include access ports, explosion-proof, quiet mode, additional shelving, battery safety options, dry air purge, dehydrated water filtration system and more.

JOEO climate test chamber combines the possibility of carrying out climatic tests with environmental protection, thanks to its reduced energy consumption and use of eco-friendly and recyclable materials.. Noise emissions were reduced by 50%. Energy consumption was reduced in the climatic test stabilization stage through a patented system that guarantees energy savings of about 70%, with absolutely no loss in performance.
 

Climatic Test Chamber for PV Modules Test: Thermal Cycling, Humidity-Freeze, and Damp-Heat test Chamber
Test 1. Thermal Cycling Test 
Reference Standard: IEC 61215:2005 & Ed.3, IEC 61646:2008 ―TC200 thermal cycling test, TC50 thermal cycling  test‖, and UL 1703-2012 ―temperature cycling test.
Test 2. Humidity-Freeze Test
Reference Standard: IEC 61215 Ed.3, IEC 61646:2008 ―humidity-freeze‖,UL 1703-2012―Humidity test
Test 3. Damp-Heat Test
Reference Standard: IEC 61215:2005 & Ed.3, IEC 61646:2008 ―damp-heat test

Salt spray testing is a method of checking the corrosion resistance of coatings and materials used to make products such as fasteners. It is an accelerated corrosion test that simulates corrosion in Marine climates and other harsh environments by producing corrosive gases and moisture containing sodium chloride in a salt spray laboratory. Salt testing machine can be used to assess the corrosion resistance of materials and compare the properties of different materials in a short period of time.
Test Method of SST Chamber
 Salt spray test methods are often used: neutral salt spray (NSS) test, acetate spray (ASS) test, copper accelerated acetate spray (CASS) test.

Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric temperature changes under the condition of rapid change in the basic safety test of electronic components, parts and products (whole machine) to provide reliability test, product screening, and so on, at the same time through this test, product quality control.

Meet Standards

GB/T 2423.1 (IEC60068-2-1);GB/T 2423.2 (IEC60068-2-2);GB/T2423.22;GJB 150.3A; GJB 150.4A; GJB 150.5A;GB/T10589; GB/T10592;GB/T11158

Environmental Test chambers feature enhanced air flow with larger compressors for change rates to 25℃/min and higher.Fast change rate test chambers simulate rapid temperature transition rates for faster product temperature changes based on your testing requirements-testing your products and yielding defects faster. Temperature range from -70℃ to +180℃ and relative humidity from 10% to 98%. Rate of temperature change (5℃/min,10℃/min,15℃/min and 25℃/min).