UV/xenon Test Chamber

UV/xenon Test Chamber

UV/xenon Test Chamber

Walk In Xenon Iamp Aging Test Chamber

Walk In Xenon Iamp Aging Test Chamber

Meet Standard 
ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials.
ASTM 04459: Standard Practice for Xenon-Arc exposure of plastics intended for indoor applications.
ISO 4892-1 Plastics - Methods of exposure to laboratory light sources.
ISO 16474-2 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2
JOEO Walk In Uv Testing Chamber

JOEO Walk In Uv Testing Chamber

Application
JOEO walk in UV testing chamber is a device used to simulate the UV radiation environment and test the weather resistance of materials. It is usually composed of ultraviolet light source, temperature control system, humidity control system, transparent sample rack, etc., which can simulate ultraviolet light exposure in the natural environment, high temperature and high humidity and other conditions for evaluating the weather resistance and durability of materials.
UV test chambers are generally widely used in automotive, construction, electronics, coatings, plastics, rubber, textiles and other fields to test the performance changes of materials under long-term ultraviolet irradiation. The test results can be used for material selection, product design and improvement, production process optimization and so on.
 
Uv Test Chamber

Uv Test Chamber

Meet Standard 
UV aging chamber ISO 4892-1 Plastic-Methods of exposure to laboratory light sources
ASTM G-151 Standard Test Method for non metallic materials exposed to accelerated test equipment using laboratory light sources
ASTM G-154 Test Mothods for non-metallic materials exposed to the UV fluorescence device
British Standard BS 2781:Part5  Test Mothods 540B (Methods of exposure to laboratory light sources)
SAE J2020 Using fluorescent UV / condensation equipment for automotive exposure test
JIS D 0205  Burn-in test method of auto parts(Japan)
 

Recommend Products

  • ESS Chambers-Temperature Humidity Chamber

    ESS Chambers-Temperature Humidity Chamber

    Application

    JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.
    This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.
    It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.

    Meet Standards

    IEC 62133-2017
    UL 1642
    UN 38.3
  • Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling)

    Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling)

    Sinusoidal excitation force range: 25 kN to 600 kN
    High frequency range, large amplitude range and adjustable, multi-axis phase, controllable acceleration, can complete the sine, random, impact test.
    Displacement peak-to-peak: 51 mm, 76mm or 100mm
    Electrodynamic shaker design with Random to sinusoidal excitation force ratio 1:1
    Vibration Directions: Vertical Vibration &Horizontal Vibration
    Completely Water-cooling systems




     
  • Vibration Test Systems MIL STD 810G Test Shaker

    Vibration Test Systems MIL STD 810G Test Shaker

    Sinusoidal excitation force range : 1kN ~ 600kN
    Test shaker covered in MIL-STD-810G are used to simulate the vibration environment that a device may experience during transportation or operation.
    Shaker test equipment test specially developed for MIL-STD-810G international standard applicant in military units and related products.


     
  • Panelized Walk In  Test Large Environmental Chamber

    Panelized Walk In Test Large Environmental Chamber

    Application:

    From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.

  • Walk In Test Chamber For CATL Battery

    Walk In Test Chamber For CATL Battery

    CATL  Battery Walk In Test Chamber

    JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.

    It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min 
    Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.