Capacity: 50L to 500 L(customizable).
Temperature Range: 105°C to 150°C (±0.5°C uniformity).
Saturated Steam: Achieves 100% RH via pressurized pure water vapor.
Pressure Range: 0.1 MPa to 0.3 MPa (1–3 atm)
Cycle Duration: 24–168H (accelerated aging equivalent to 1,000H+ in standard 85°C/85% RH tests).
| Serial number | Capacity ( m3 ) | 0.018 | 0.048 | 0.088 | 0.199 | |
| 1 | Model | HAST Pressure Accelerated Aging Test Chamber | EQ-PCT-18 | EQ-PCT-48 | EQ-PCT-88 | EQ-PCT-199 |
| 2 | Internal Dimensions (Diameter ×D)mm | Ф300x250 | Ф450x300 | Ф500x450 | Ф650x600 | |
| 3 | External Dimension WxHxD (mm) | 500x500x700 | 580x850x650 | 800x750x900 | 950x900x1100 | |
| 4 | Steam Temperature Range | +110C to +135℃ | ||||
| 5 | Temperature Fluctuation | ≤ ± 0.5℃ | ||||
| 6 | Temperature Uniformity | ≤ 1.5℃ | ||||
| 7 | Humidity Range | 100%R.H Saturated vapor | ||||
| 8 | Humidity Uniformity | ± 1.5% RH | ||||
| 9 | Humidity Uniformity | ± 3.0% RH | ||||
| 10 | Pressure range | 0 to +2 kg/cm² (Operational range: 0 to +3 kg/cm²) Absolute Pressure Range: 1.0-3.0 kg/cm² Safety Pressure Capacity: 4 kg/cm² Equal to 1 atmospheric pressure + 3 kg/cm² gauge pressure | ||||
| 11 | Circulation Mechanism | Natural convection of water vapor | ||||
| 12 | Test Time Setting | Programmable duration: 0-999 hours | ||||
| 13 | Pressurization Time | Achieves 0.00→2.00 kg/cm² in ≈30 min (non-linear ramp under no-load conditions) | ||||
| 14 | Temperature Ramp Profile | Ambient→132℃ in ≈30 min (air temperature-based control, not product temperature) | ||||
| 15 | Safety Protections | Dual-mode Water Management (Automatic/manual water replenishment, Automatic pressure relief) Critical Safeguards （Low-water cutoff protection，Overpressure interlock） | ||||
| 16 | Power | AC220V; 1phase 3 lines ; 50/60HZ AC380V; 3phase 5 lines ; 50/60HZ | ||||
Features
1.Hyper-Accelerated Aging:
•Combines high temperature, 100% RH, and pressure to simulate decades of environmental degradation in days.
2.Precision Control:
•Triple-redundant PT100 sensors and PID algorithms for<1% pressure fluctuation.
3.Safety Systems:
•Auto-pressure release valves, hydrogen gas detection (for battery/polymer tests), and emergency cooling.
4.Corrosion-Resistant Build:
•SUS316L stainless steel interior, PTFE-coated seals, and ceramic-coated heaters.
5.Smart Connectivity:
•IoT-enabled remote monitoring, predictive maintenance alerts, and compliance with FDA 21 CFR Part 11 data integrity.
Standards Supported
1.Global Electronics:
•JEDEC JESD22-A110 (HAST), IPC-9701 (Board-Level Reliability).
2.Automotive:
•AEC-Q100/101/200, ISO 16750-2 (Humidity Resistance).
3.Military:
•MIL-STD-202 (Method 106), MIL-STD-750 (Method 1021).
4.Sustainability:
•Compliant with EU RoHS 2025/09 (hazardous substance limits) and China GB/T 2423.40-2025.
1.Semiconductor Packaging:
•Evaluates delamination, wire bond integrity, and mold compound stability in advanced 3D-IC designs.
2.Automotive Electronics:
•Validates ECU reliability under extreme humidity-pressure conditions (AEC-Q100 Rev-H).
3.Consumer Electronics:
•Tests waterproof seals (IP68) and flexible OLED displays for foldable smartphones.
4.Aerospace:
•Qualifies satellite PCBs and connectors for GEO (geostationary orbit) humidity resistance.
5.Medical Devices:
•Accelerated lifespan testing for implantable battery casings and sterilizable sensors.
We will contact you within 1 working day, please pay attention to the email with
the suffix "@test-eq.com".
We will contact you within 1 working day, please pay attention to the email with the suffix "@test-eq.com".
P.IVA: 91441900MAECQJHY37 Guangdong TESTEQ Testing Equipment Co., LTD | All Rights Reserved
