IEC 68-2-2 Test method B: dry heat
IEC 68-2-3 Test method Ca: Steady-state wet heat
IEC 68-2-5 Test methods Mountain: Ground-based solar radiation simulation
IEC 68-2-6 Test method Fc and instructions: Sinusoidal vibration
IEC 68-2-7 Test method Ga and guidelines: Steady-state acceleration
IEC 68-2-9 Guidelines for Solar radiation tests
IEC 68-2-10 Test method J and guidelines: Molds
IEC 68-2-11 Test method Ka: Salt spray
IEC 68-2-13 Test method M: low pressure
IEC 68-2-14 Test method N: Temperature variation
IEC 68-2-17 Test method q: sealing property
IEC 68-2-18 Test method R and instructions: water
IEC 68-2-20 Test method T: soldering
IEC 68-2-21 Test method U: Terminal strength, toughness and integrity of the whole fixture
IEC 68-2-27 Test method Ea: Impact
IEC 68-2-27 Test Ea: Shock
IEC 68-2-28 Wet heat test guidelines
IEC 68-2-29 Test method Eb and guidelines: Turbulence
IEC 68-2-30 Test method Db: wet heat temperature cycling
IEC 68-2-31 Test method Ec: Drop and pour, primarily for equipment level products
IEC 68-2-32 Test method Ed: Free drop
IEC 68-2-33 Guidelines for test of temperature variation
IEC 68-2-34 Test method Fd: General rules for wideband random vibration
Iec 68-2-37 - Test Method FDE - Wideband Random Vibration
IEC 68-2-38 Test method Z/Advertisement: Combined temperature and humidity cycling test
IEC 68-2-39 Test method Z/AMD: Combination test of low temperature, low pressure and wet heat, low pressure sequence
IEC 68-2-40 Test method Z/Q: low temperature/low pressure combined test
IEC 68-2-41 Test method Z/BM: dry heat/low pressure combined test
IEC 68-2-42 Test method Kc: Test for sulfur dioxide on contacts and connectors
IEC 68-2-43 Test method Kd: Test for hydrogen sulfide on contacts and connectors
IEC 68-2-44 Technical guidance for test method T: soldering
IEC 68-2-45 Test method XA and instructions: Immersion in a clean solution
IEC 68-2-46 Test method Kd guidelines: Test for hydrogen sulfide on contacts and connectors
IEC 68-2-47 Fixed methods and guidelines for dynamic testing of elements, equipment and other products
IEC 68-2-48: IEC 68 Application guidelines for simulation tests of storage effects
IEC 68-2-49 Test method Kc guidelines: Test for sulfur dioxide on contacts and connectors
IEC 68-2-50 Test method Z/AFe: Combined test of sinusoidal vibration at low temperature for heat-generating and non-heat-generating specimens
IEC 68-2-51 Test method Z/Huang Donghai: Combined sinusoidal vibration test for dry heat of heat-generating and non-heat-generating specimens
IEC 68-2-52 Test method Kb: Cyclic salt spray
IEC 68-2-53 Guidelines for combined test of temperature (low temperature, dry heat) and vibration (sine)
IEC 68-2-54 Test methods Teaching assistant: Soldering - solderability test by wetting force balance method
IEC 68-2-55 Test method Ee and instructions: Jumping
IEC 68-2-56 Test method Cb: Equipped with stable heat and humidity
IEC 68-2-57 Test method Ff: Vibration-time domain method
IEC 68-2-58 Test method specifies: Test for solderability, heat resistance and melt resistance of metal coating of surface mount elements
IEC 68-2-59 Test method: Vibration - sinusoidal frequency strike method
IEC 68-2-60 Test methods section: Artificial low concentration polluted gas corrosion test
IEC 68-2-61 Test method Z/ABDM: Climate sequence
IEC 68-2-62 Test method EF: Swing hammer impact
IEC 68-2-63 Test method: Impact with a spring hammer
IEC 68-2-64 Test method Fh: Wideband random vibration (digital control) and guidelines
IEC 68-2-65 Test method Fg: acoustic-derived vibration
IEC 68-2-66 Test method Residual snow: steady-state wet heat (unsaturated pressurized vapor)
IEC 68-2-68 Test method 1: sand and dust
IEC 60068-2 Project Specification Conditions Specification Name (Chinese)1
IEC 60068-2-1-2007 Environmental testing - Part 2: Testing - Test Answer: Low temperature 2
IEC 60068-2-2-2007 Basic environmental test procedures - Part 2-2: Tests - Test B: Dry heat
