THC-Series Temperature Chambers For UNE EN-391 Laminated Glulam Wood Test
Glue-laminated wood/glue-laminated wood flooring/Wood floor Testing
UNE EN-391, GLUED LAMINATED TIMBER - DELAMINATION TEST OF GLUE LINES
Temperature chambers are special design for wood floor's testing. This test is carried out to create internal stresses perpendicular to the adhesive lines, in the wood by means of a humidity gradient, so that defective glues suffer delamination in these lines.
With our JOEO climatic chamber test shall be carried out in a temperature chambers with air speed control and with characteristics that allow the climatic conditions established in each of the three types of test methods: A, B or C, to be achieved.
The Temperature chambers THC-Series have been designed to meet the most demanding drying test conditions of this standard, method B:
Temperature between 65ºC and 75 ºC,
Relative humidity Range 8 to 10% R.H
UNE EN-391, GLUED LAMINATED TIMBER - DELAMINATION TEST OF GLUE LINES
Temperature chambers are special design for wood floor's testing. This test is carried out to create internal stresses perpendicular to the adhesive lines, in the wood by means of a humidity gradient, so that defective glues suffer delamination in these lines.
With our JOEO climatic chamber test shall be carried out in a temperature chambers with air speed control and with characteristics that allow the climatic conditions established in each of the three types of test methods: A, B or C, to be achieved.
The Temperature chambers THC-Series have been designed to meet the most demanding drying test conditions of this standard, method B:
Temperature between 65ºC and 75 ºC,
Relative humidity Range 8 to 10% R.H
