Contact Us: +8613310826672 / [email protected]
Environmental Test Chambers fast Delivery time ,environmental test chambers that meet a variety of needs,simulates various pressure and altitude conditions,test the endurance, stability, and practicality of equipment, products, and chemicals
JOEO THC-Series Climate test chambers are commonly used in electronic appliances, military, plastics, hardware, chemical, textile and other industries. Specific test products such as electronic parts, automotive parts, notebooks, batteries, packaging, cosmetics, circuit boards, temperature, moisture meters, etc.
Available for Climatic Test Chambers testing include a wide range of temperature ramp rates, humidity levels, and many standard and optional features, including temperature cycling, steady-state testing, and rapid rate of change. Other options include access ports, explosion-proof, quiet mode, additional shelving, battery safety options, dry air purge, dehydrated water filtration system and more.
JOEO climate test chamber combines the possibility of carrying out climatic tests with environmental protection, thanks to its reduced energy consumption and use of eco-friendly and recyclable materials.. Noise emissions were reduced by 50%. Energy consumption was reduced in the climatic test stabilization stage through a patented system that guarantees energy savings of about 70%, with absolutely no loss in performance.
Climatic Test Chamber for PV Modules Test: Thermal Cycling, Humidity-Freeze, and Damp-Heat test Chamber
Test 1. Thermal Cycling Test
Reference Standard: IEC 61215:2005 & Ed.3, IEC 61646:2008 ―TC200 thermal cycling test, TC50 thermal cycling test‖, and UL 1703-2012 ―temperature cycling test.
Test 2. Humidity-Freeze Test
Reference Standard: IEC 61215 Ed.3, IEC 61646:2008 ―humidity-freeze‖,UL 1703-2012―Humidity test
Test 3. Damp-Heat Test
Reference Standard: IEC 61215:2005 & Ed.3, IEC 61646:2008 ―damp-heat test
-(2).gif?imageView2/1/w/600/h/600)
Benchtop environmental chamber JOEO DTHC-Series:A compact climatic chamber for use in R&D departments that need to test small components and limited size products.
Temperature range:(A: 25℃; B: 0℃; C: -20℃; D: -40℃) to +150℃
Temperature Variation:± 1ºC
Temperature Deviation: ± 2.0ºC (temperature ≤ 100ºC); ± 3.0ºC (temperature > 100ºC)
Humidity range:(20 to 98)% RH ,when temperature 75℃to 95℃ test 10%R
JOEO factory supply a variety of environmental chambers for testing small battery cells to large lithium ion battery packs. Battery test chambers are supplied to a variety of industries including telecommunications, computer and automotive.
Each humidity control chamber is built according to specific test requirements and may be interfaced with battery cyclers, control & monitoring data acquisitions systems and other test equipment for a complete integrated test solution.
With the goal of reducing automobile emissions and the development of electric vehicles, the need for lithium ion battery test is even more critical.
Our proven experience provides the most cost-effective solutions.
-(1).gif?imageView2/1/w/600/h/600)
JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.Temperature range from -70℃ to +180℃ and relative humidity from 5% to 98%. Rate of temperature change (3℃/min,5℃/min,10℃/min,15℃/min).
This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.
From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.
