JOEO - Professional Climate Chamber Manufacturers

MIL-STD-810G High Temperature Test--Climatic Chamber

The MIL-STD-810G test method was developed specifically for dod applications, but can also be customized for commercial applications and includes a variety of environmental tests, including: Low Pressure (Altitude) ,High Temperature,Low Temperature,Temperature Shock,Salt Fog ,Sand and Dust,Vibration,shock, this article is mainly about High temperature test 501.5 in MIL-STD-810G test method Purpose The MIL-STD

JISD 1601 Automotive Parts Test Method--Electromagnetic Shaker For Vibration Test

Auto parts need to go through a series of environmental reliability tests such as temperature, humidity, salt spray corrosion, shock, vibration, etc. Among many tests, vibration test is the most difficult, JIS D 1601 standard aims to provide a common test method and standard for the automotive industry to evaluate the vibration environment faced by parts in actual use. The standard covers various types of vibration t

What Are The Equipment In The IEC 60068 Shock Test Method

IEC 60068 shock test method provides a standard procedure for determining the ability of a specimen to withstand unrepeated or repeated shocks of specified intensity. The purpose of this test is to reveal mechanical defects and/or degradation of specific properties, or cumulative damage or degradation caused by impact. In conjunction with relevant specifications, it can be used in some cases to determine the structur

What Is ISTA 3A Vibration Testing

What is ISTA 3A Vibration Testing ISTA 3 Series tests are advanced tests and are designed to：Challenge the capability of the package and product to withstand transport hazards, but Utilize general simulation of actual transport hazards, andDo not necessarily comply with carrier packaging regulations. Test Procedure 3A is a general simulation test for individual packaged-products shipped through a parcel delivery

ISO 9227 Salt Spray Test-Salt Fog Test Chamber

ISO 9227 Salt Spray Test Method specifies equipment, reagents and procedures for testing neutral salt spray (NSS), acetate spray (AASS) and copper accelerated acetate spray (CASS) for assessing the corrosion resistance of metallic materials, with or without permanent or temporary corrosion protection. The method of environmental corrosivity evaluation of test cabinet is also introduced. It does not specify the size o

JOEO Successfully Delivered 2 Walk In Chamber To German Laboratories

Guangdong ALI Testing Equipment Co,. Ltd. successfully delivered two Walk In Chamber to the German research laboratory.according to the customer's requests.According to customer requirements, the inner wall of the box adopts high nickel sus# 304 stainless steel degaussed, the plate thickness is 3.0mm, the compressor adopts German GEA BOCK brand compressor, and the dehumidizer is configured according to cust

Satellite Vibration Testing--Vibration Testing Machine

In space, satellites must function properly under extreme operating conditions. Space is an almost vacuum environment, and satellites need to deal with high levels of electromagnetic radiation and drastic temperature changes. In addition, during launch, satellites experience extremely high levels of vibration and noise, which can cause serious component damage or destruction. Therefore, before sending these expensive

Which Values In The Salt Spray Test Determine The Corrosion Results

Most of the corrosion of metal materials occurs in the atmospheric environment, and the atmosphere contains corrosion components and corrosion factors such as oxygen, humidity, temperature changes and pollutants. Salt spray corrosion is a common and most destructive atmospheric corrosion. The most common in our daily life is the artificial accelerated simulated salt spray environmental test. The artificial accelerat

ISO 16750-4 Climatic Test Chamber Test Method

ISO 16750 certification is designed to qualify road vehicles. This document specifies environmental procedures and tests for electrical and electronic equipment. In fact, it applies to the electrical and electronic systems/components of the vehicle. It describes potential environmental limitations and specifies recommended tests and requirements for specific mounting locations on/inside the vehicle ISO 16750 climat

RTCA DO-160 Vibration Testing For Aircraft Airborne Equipment

What is DO-160 Vibration testing? Maintained and published by the Aeronautical Radio Technical Commissioner, or RTCA, and adopted by the US Federal Aviation Administration and the European Aviation Safety Agency since its first publication in 1975, DO-160 defines a set of minimum standard environmental test conditions (categories) and applicable test procedures for airborne equipment. The purpose of these tests is t

All Articles

MIL-STD-810G High Temperature Test--Climatic Chamber

JISD 1601 Automotive Parts Test Method--Electromagnetic Shaker For Vibration Test

What Are The Equipment In The IEC 60068 Shock Test Method

What Is ISTA 3A Vibration Testing

ISO 9227 Salt Spray Test-Salt Fog Test Chamber

JOEO Successfully Delivered 2 Walk In Chamber To German Laboratories

Satellite Vibration Testing--Vibration Testing Machine

Which Values In The Salt Spray Test Determine The Corrosion Results

ISO 16750-4 Climatic Test Chamber Test Method

RTCA DO-160 Vibration Testing For Aircraft Airborne Equipment

Quick Inquiry