Contact Us: +8613310826672 / [email protected]
Climate chamber manufacturers for temperature and environmental testing, offers the ideal solution for thermal or climatic testing, simulation and exposure to weather, temperature cycles, aging testing and stress testing.Select the type of test and the area of application, create your own environment!
JOEO horizontal thermal test chamber is the best choice for batch testing and large test loads. The interior design is used for custom environmental stress screening of components and board level electronic components. The carrier basket transfers loads between hot and cold zones in two - or three-zone configurations, and is widely used in automotive, electronic and electrical, aerospace, communication equipment, medical equipment and other industries.
Meet Standards
JOEO Altitude Chamber for Electrical,electronic,military industry and household products. Design team according to GB,GJB and IEC standard,to do Low pressure altitude testing chamber high low temperature,humidity thermal,low pressure and other environmental and reliability test.General introduction: Altitude Chamber is composed of test room formed by pressure-containing box shell and insulation structure, refrigeration system, add wet system,vacuum system and electric control system and other components. can simulate temperature, humidity, altitude and vibration simultaneously to the maximum extent, to conduct a combined environmental system. Mainly used to simulate plateau climate or aviation and aerospace industry.
.gif?imageView2/1/w/600/h/600)
Mainly used in aviation, aerospace, military units, electronics, IT industry and other test products in the surrounding atmospheric temperature changes under the condition of rapid change in the basic safety test of electronic components, parts and products (whole machine) to provide reliability test, product screening, and so on, at the same time through this test, product quality control.
Meet standards
GB/T 2423.1 (IEC60068-2-1);GB/T 2423.2 (IEC60068-2-2);GB/T2423.22;GJB 150.3A; GJB 150.4A; GJB 150.5A;GB/T10589; GB/T10592;GB/T11158
Introduction
• Can adjustable temperature and time settings
• Continuous, single climate cyclic corrosion test
• Neutral pH salt spray standard ASTM B117
• Capacity range 430L to 2500L
-(2).gif?imageView2/1/w/600/h/600)
Benchtop environmental chamber JOEO DTHC-Series:A compact climatic chamber for use in R&D departments that need to test small components and limited size products.
Temperature range:(A: 25℃; B: 0℃; C: -20℃; D: -40℃) to +150℃
Temperature Variation:± 1ºC
Temperature Deviation: ± 2.0ºC (temperature ≤ 100ºC); ± 3.0ºC (temperature > 100ºC)
Humidity range:(20 to 98)% RH ,when temperature 75℃to 95℃ test 10%R
JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.Temperature range from -70℃ to +180℃ and relative humidity from 5% to 98%. Rate of temperature change (3℃/min,5℃/min,10℃/min,15℃/min).
This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.
From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.
