All Products

English Français اللغة العربية Pусский Deutsch Español Italiano Polskie 日本語 Svenska Português 한국어 Türk
  • Current Location:
  • Home
  • All Products

All Products

JOEO is a leading manufacturer of climatic test chamber,vibration test system with over 20 years of experience. We offer high-quality products such as thermal test chamber, salt spray chambers,electrodynamic shaker, etc.

Walk In Test Chamber For CATL Battery

Walk In Test Chamber For CATL Battery

CATL  Battery Walk In Test Chamber

JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.

It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min 
Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.
Quick Inquiry View Details
Drop Tester Drop Test in Packaging

Drop Tester Drop Test in Packaging

Application
JOEO Package drop tester is suitable for free fall testing of small consumer electronic products and components such as mobile phones, walkie-talkies, electronic dictionaries, CD/MD/MP3, and applicable to JISC 0044 and IEC 60068-2-32.
Selection of structural materials: the drop testing machine provides a basis for the cushioning and vibration reduction design of the product
Evaluation method: falling naked or falling with the package; Check the impact resistance of the product or damage caused by falling during transportation.
Improving product quality: an indispensable means of inspection
Scope of application: electronic products research, development, quality control, manufacturing and other links.
Accuracy are strictly designed by JOEO “1G+”.

 
Quick Inquiry View Details
Sand Dust Test Chamber GOST20.57.306-98

Sand Dust Test Chamber GOST20.57.306-98

Application
Provide sand and dust climate environment test device, used in the laboratory to simulate sand blowing environment, assess the adaptability of military mechanical equipment, mechanical, electrical, electronic, electrochemical and electromechanical equipment exposed to dry sand and dust conditions, and evaluate the ability of equipment to resist dust and store and work under sand and dust conditions. The product is implemented in strict accordance with the military standard GOST20.57.306-98, and the materials used have good corrosion resistance and high temperature resistance, ensuring stability in extreme environments.
Quick Inquiry View Details
Liquid To Liquid Thermal Shock Chamber

Liquid To Liquid Thermal Shock Chamber

Liquid-to-liquid thermal shock test chambers are often used to test electronic components by abruptly and repeatedly moving them from a container containing a hot liquid to a container containing a cold liquid to withstand strong shocks. The liquid used remains physically unchanged within the temperature range of the climate chamber, subjecting the DUT (device under test) to a strong shock to test its resistance.
Quick Inquiry View Details
Semiconductor Dry Oven

Semiconductor Dry Oven

Application
JOEO stacked semiconductor dry oven have earned a long-standing reputation for outstanding performance, long service life and ease of operation in a variety of applications. Semiconductor ovens feature high capacity horizontal air recirculation systems that maximize temperature uniformity and performance for curing, drying, and baking in semiconductors, electronics, and many other industrial applications. Stacked structures use space to increase productivity and are ideal for mass production applications.
Quick Inquiry View Details
PCB Drying Oven

PCB Drying Oven

PCB (printed circuit board) drying Oven oven is an industrial oven used to cure or bake electronic components. PCB dry oven is a controllable oven that can cure the epoxy resin or solder resistance coated on the surface of the PCB and remove the internal moisture, which is widely used in the electronics manufacturing industry for drying electronic components (printed circuit boards), curing coatings, adhesives and other materials.
Quick Inquiry View Details

Recommend Products

  • ESS Chambers-Temperature Humidity Chamber

    ESS Chambers-Temperature Humidity Chamber

    Application

    JOEO ESS chambers are suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test.
    This type of temperature humidity chamber mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability.
    It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.

    Meet Standards

    IEC 62133-2017
    UL 1642
    UN 38.3
    Quick Inquiry View Details
  • Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling）

    Vibration Test Equipment Sine Random Shock of Electric Vehicle Batteries(Water-Cooling）

    Sinusoidal excitation force range: 25 kN to 600 kN
    High frequency range, large amplitude range and adjustable, multi-axis phase, controllable acceleration, can complete the sine, random, impact test.
    Displacement peak-to-peak: 51 mm, 76mm or 100mm
    Electrodynamic shaker design with Random to sinusoidal excitation force ratio 1:1
    Vibration Directions: Vertical Vibration &Horizontal Vibration
    Completely Water-cooling systems




     
    Quick Inquiry View Details
  • Vibration Test Systems MIL STD 810G Test Shaker

    Vibration Test Systems MIL STD 810G Test Shaker

    Sinusoidal excitation force range : 1kN ~ 600kN
    Test shaker covered in MIL-STD-810G are used to simulate the vibration environment that a device may experience during transportation or operation.
    Shaker test equipment test specially developed for MIL-STD-810G international standard applicant in military units and related products.


     
    Quick Inquiry View Details
  • Panelized Walk In Test Large Environmental Chamber

    Panelized Walk In Test Large Environmental Chamber

    Application:

    From aerospace and avionics to refrigerators and automobiles, JOEO panelized large environmental chamber serve as testing grounds for components and finished products. Knowing the size, quantity, and test requirements of your product can help you determine the best chamber size for your application. If our standard equipment does not meet your test requirements, we will design a custom test box that can meet your test requirements.

    Quick Inquiry View Details
  • Walk In Test Chamber For CATL Battery

    Walk In Test Chamber For CATL Battery

    CATL  Battery Walk In Test Chamber

    JOEO Walk In Test Chamber's temperature cyclic stress screening is to change the external environmental stress by using the temperature acceleration technique (the product produces alternating expansion and contraction when circulating in the upper and lower extreme temperatures) under the design strength limitation, so as to generate thermal stress and strain in the product.

    It can set different stress screening temperature change rate 5℃/min,10℃/min,15℃/min,20℃/min 
    Walk In test chamber(ESS chamber) is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature cycling & temperature stress screening (ESS) test and constant humidity and cyclic damp heat test.
    Quick Inquiry View Details