Standard Testing- JOEO testing

IEC 60068 Environmental Testing

IEC 60068 Environmental Testing is an internationally recognized standard developed by the International Electrotechnical Commission and is a collection of methods for environmental testing of electronic equipment, components and electromechanical products to assess their performance and survivability under conditions such as transport, storage, operating environments, extreme cold and extreme heat. Temperature chan

ASTM E1171 Environmental Test Chamber Test Method For Photovoltaic Module

ASTM E1171 Environmental Test Chamber Test Method is a standard published by the American Society for Materials and Testing (ASTM International) that standardizes test methods for environmental testing chamber The ASTM E1171 test method provides procedures for applying stress to photovoltaic modules in simulated temperature and humidity environments. Environmental tests are used to simulate accelerated aging of

General Motors GM4298P Salt Spray Test

General Motors GM4298P Salt Spray Test GENERAL MOTORS ENGINEERING STANDARDS & Materials and Processes-Procedures JOEO Factory are professional support for this standard of corrosion test machine, our SSTC-Series are special design for this testing. Details of GM4298 ,Please reference with below : 1 SCOPE. This standard covers the requirements necessary to attain the conditions found in a neutral salt

ASTM D1654 Standard Test Method for Evaluation of Painted or Coated Specimens

What is ASTM D1654 standard? Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments1 8. Procedure A—Evaluation of Rust Creepage for Scribed Specimens 8.1 Rinse each specimen after completion of the exposure period, using a gentle stream of water at a temperature up to 45C (110°F). Remove coating along scribe with one of the following methods such

ASTM B368 Salt Spray (CASS Test) /Fog Testing

ASTM B368 Salt Spray (CASS Test) /Fog Testing ASTM B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test) Scope: This test method prescribes the conditions required in copper-accelerated acetic acid-salt spray (CASS) testing for specification purposes. The standard does not specify the type of test specimen or exposure periods to be used for a specific product, nor

ASTM B117 Salt Spray Test

ASTM B117 Salt fog and Salt Spray Test What is the purpose of ASTM B117 Salt Spray test? The purpose of the ASTM B117 Salt Spray test is to provide a controlled accelerated corrosive environment to evaluate the relative corrosion resistance of the coating, substrate, or part itself. JOEO factory professional produce multiple chambers available to run parts and panels of many sizes for the ASTM B1

MIL-DTL-5541F Salt Fog Testing

What is MIL-DTL-5541？ MIL-DTL-5541 is a military specification related to conversion coatings. This is produced by reacting with aluminum and its alloys as chemically transforming substances. Military specification MIL-DTL-5541 (Chemical Conversion coating for Aluminum and aluminum alloys) is suitable for chemical conversion coating formed by the reaction of chemical conversion materials on aluminum and aluminum

MIL-STD 202 Thermal Shock Testing

What is thermal shock testing Thermal shock testing is an accelerated test that identifies failure patterns due to rapid changes in temperature. The test is designed to simulate the wear that the product would experience under normal conditions or standard use in an accelerated environment. These sudden changes in temperature can cause physical elements to break, crack, or combine in unexpected ways, and thermal sho

ASTM G85

Salt Spray Chamber for sea water acetic acid test (SWAAT) for AC and Refrigerator's raw materials A1. ACETIC ACID-SALT SPRAY (FOG) TESTING Standard ASTM G85 Annex A1- A3 A1.2 Conditions in Saturator Tower: A1.2.1 Make sure the temperature in the saturator tower(bubble tower) is 47 ± 1°℃ (117 ± 2°F). A1.3 Conditions in the Salt Spray Chamber: A1.3.1 Temperature—Maint

Standard Testing

Quick Inquiry